怎么样安装7.5？急

破解码全有了在安装是时候地一个安装目录就是这样。是记事本来的，什么原因。下面几个根本安装不了、  NX                                           VERSION 7.5.3.3

        Windows (32 Bit)                             Issued:   March 2011

        Files on this media are intended for use on 32 Bit Windows XP,
        Vista and Windows 7 platform only.

        This software may also be used on 64 Bit Windows platforms running
        32 bit applications.

        _______________________________________________________________________
        UPDATE INSTRUCTIONS:

        This media contains Maintenance Release files provided as replacements
        for previously installed NX 7.5 products.

        The Base release for this maintenance release is a prerequisite to
        installing this update. e.g. Version XX.Y must be installed before
        updating to Version XX.Y.Z

        Several methods are provided to perform the update:
          1. Autoplay the DVD then select 'Install UGS Update'.
          2. Or, run the DVD 'launch.exe' program then select 'Install UGS Update'.
          3. Or, change dir to the ugs_updateXXXX folder then run 'run_ugsupdate.exe'.

          The above methods will all run 'run_ugsupdate.exe'. It will read the correct
          %UGII_BASE_DIR% from the Registry and apply the update to the NX 7.5 folder.

          4. OR, you may follow the instructions below to run ugs_update.bat directly.
      
        Change directory to the 'ugs_updateXXXX' folder,
        check that UGII_BASE_DIR is set to the installed NX7.5 folder,
        then execute the 'ugs_update.bat' script.        

             e.g. cd ugs_updateXXXX
             ugs_update.bat  /v

        The use of UNC pathnames (e.g. \\server\path) is supported by both
        ugs_update.bat and run_ugsupdate.exe.

        The script supports a "/v" switch to turn on verbose messages while doing the
        file updates. The default operation of the script is non-verbose.

        The script supports a "/d" switch.  This will turn off the script
        confirmation prompts. Useful for running the update in a batch job.

        The script also supports a "/p" switch.  This will turn off the initial
        confirmation prompt but it will display the final 'done' prompt. This is useful
        for running the update in a batch job where a final prompt is desired.

        NOTE:  Before running the ugs_update script, please make sure that the
        environment variable %UGII_BASE_DIR% is set to the base directory of
        the NX 7.5 release.

        e.g: set UGII_BASE_DIR="C:\Program Files\UGS\NX 7.5"

        Or set the variable to the appropriate installed folder on your system.

        SILENT UPDATES: Advanced users may use standard DOS output redirection to
        install the update silently with no screen displays, except on errors.

        For example, to turn off all output:

        e.g:  ugs_update /d  >NUL 2>&1
              - or -
              run_ugsupdate.exe >NUL 2>&1

        Caution: you MUST the change "switches" settings in run_ugsupdate.ini to "/d"

        To redirect the output to a log file. (Recommended)

        e.g:  ugs_update /d  >c:\temp\update_log.txt 2>&1
              - or -
              run_ugsupdate.exe >c:\temp\update_log.txt 2>&1

        _______________________________________________________________________
        WINDOWS 64:  

        The software on this media was originally intended for 32 bit platforms
        but it may also be used on 64 bit hardware running 32 bit applications.
  
        _______________________________________________________________________
        RELEASE LETTER: The Release Letter specific to this release is included
                        in the REL_INFO kit of this update.  It will be
                        installed automatically by the update script.

        A copy of the Release Letter is also provided in the "docs" folder.
        This is viewable with standard Web Browsers such as Internet Explorer.

        Begin browsing with the following initial file:

            docs\release_notes\english\index.htm
        _______________________________________________________________________

7.5 的安装，郑老师有视频讲解的，在免受权的课程中，你可以下载！

UG7.5并存于UG6.0安装教程



原已装有NX6.0,现装NX7.5.0.32在同一盘符UGS下，只正常安装NX，注意：不用修改UGS4.lic里面的内容,也不要安装服务器(UGSLicensing)!
完成后按下面操作:
1.将安装盘内ugslicensing040\program files\ugs\UGSLicensing\文件夹下的内容复制到安装目录X:\UGS\NX7.5\UGFLEXLM里面,
2.将安装盘内破解文件覆盖安装路径下的文件,
强调:必须覆盖X:\UGS\NX7.5\UGFLEXLM\ugslmd.exe,否则将不支持启动NX7.5以前的版本；
另拷贝UGS4.lic到X: \UGS\UGSLicening里面
3.双击lmtools,打开服务器
4.单击Config Services选项卡,
①在Service Name使用原NX6.0的名称,其它的删去
②在Path to the lmgrd.exe file中单击Browse,选择路径X:\UGS\NX 7.5\UGFLEXLM\lmgrd.exe

③在Path to the license file中单击Browse,选择路径X:\UGS\UGSLicening\UGS4.lic
④在Path to the debug log file中单击Browse,选择路径X: \UGS\UGSLicening \ugslicensing.log（此步骤可省略）
5.勾选Start Server at Power Up和Use Services（此操作将服务器设置为开机自动运行）
6.单击Save Service,选择“是”
7.单击“Start/Stop/Reread”选项卡,单击“Start Server”

8.重启电脑

回复 1# duanbinglong


    我给你一个网址，在那里下载，里面有非详细的安装步骤。WWW。MFCAD。COM自己在里面搜索UG7。5安装就有了

回复 4# 云过风清


    谢谢你。